Planet Z

Scope Community
It is currently Tue Sep 16, 2014 9:04 pm

All times are UTC




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 1:05 am 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
Hi,

here is a Delay Edition of SPINNER. The configuration is Delay1 > SPINNER > Delay2. The delays are purely tempo-based. You can set the BPM values with the BPM pots or by typing your desired tempo into the BPM displays. After setting your tempo/s you can then set separate Quantize values for L & R to give you your desired delay time/s.

Presets should be fully working, but I haven't made very many for this yet, so in the meantime, you can either create your own preset bank from scratch or make a copy of the 'SPINNER.pre' file & rename it to 'SPINNER DE.pre' which will allow you to load the default SPINNER presets.

Have fun & let me know what you think. :cool:

~Mark


Attachment:
SPINNER_DE.zip [930.88 KiB]
Downloaded 780 times


Attachment:
SPINNER_DE_screenshot.jpg
SPINNER_DE_screenshot.jpg [ 290.96 KiB | Viewed 4055 times ]


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 2:11 am 
Offline
User avatar

Joined: Mon Jul 04, 2005 12:00 am
Posts: 379
Thanks dude,

Tho at the moment I been so busy I havent even had a chance to try out the no delay spinner. Tho the feedback for it makes me sure it and thus, this, is gonna be awesome.

so thanks again


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 4:21 am 
Offline

Joined: Tue Feb 26, 2008 4:40 am
Posts: 141
Location: Sydney Australia
Thanks,

I tried Spinner last night - WOW!
Now to try the delay version.

Sweet.

Hope I can contribute something as good when I get going with the SDK. :D

Eric.

_________________
Your mouse has moved. Windows must be restarted for these setting to take effect.

Eric Northwood - Data Recovery Specialist
http://www.datarecovery.com.au


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 9:37 am 
Offline
User avatar

Joined: Fri May 25, 2001 12:00 am
Posts: 2962
i love the way the BPM changes the delay times - doubles as a delay time calculator :D. Much prefer the new momentary buttons too.


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 6:09 pm 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
Mr Arkadin wrote:
i love the way the BPM changes the delay times - doubles as a delay time calculator :D.


Has nobody ever made a delay time calculator for Scope? I can easily make one if there isn't one already available.


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 6:20 pm 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
Here's a couple of audio files I made of a TR-606 & Vermona DRM-1 going through SPINNER DE. The delay times aren't accurately tempo matched to the 606 sequencer in these, so it's pretty loose. The quality is low in these M4A files as well... :cool:

Attachment:
SPINNER_DE_demo001.m4a [723.37 KiB]
Downloaded 119 times
Attachment:
SPINNER_DE_demo002.m4a [1.85 MiB]
Downloaded 110 times


~Mark


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 6:37 pm 
Offline
User avatar

Joined: Mon Jul 25, 2005 12:00 am
Posts: 11339
Location: PROJECT WINDOW
Yeah Shroomz........That's The Ticket.
I right clicked on the M4A files and opened then in IvIvo as I thought there was possibly some attached video frames.
The first demo was a taste, the second demo was definately the entree.
Acoustic, Latin Perc & Electro.
This is what these threads should be like.
Much more fun sharing than the usual.....sounds great thanks alot.....proove it's use.
The second M4A is worth stealing and the Spinner's making some serious Spinnage indeed.

Excellente Trabrajo Cabrone...........

_________________
https://soundcloud.com/jimmyvee/sets/solaris-demos-1
http://soundcloud.com/jimmyvee/sets/sol ... akt-tunes/


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Fri Apr 03, 2009 7:08 pm 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
The Latin perc was a TR-727.
Yeah, the use of m4a & ogg file extensions in attachments was enabled about an hour ago. :cool:

~M


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Sat Apr 04, 2009 4:14 pm 
Offline
User avatar

Joined: Sun May 04, 2008 12:20 am
Posts: 105
Location: Belgium
Hi,

Great work :wink: I love it.

I made a xtc dll file for the SPINNER en works ok as xtc pluggin but no go with the SPINNER_DE it loads but no GUI !

Maybe you know why ?

P.L.U.R

Danny.

_________________
Cubase 5,Scope v5.1 XTC,2xScope Project+2x A16 Ultra+PoCo 6000(CL1B+Virus)+UAD2-QUAD(Comp,Rev,EQ)+plugiator Full.Mackie Control+Ext.ASUS P5WDH,CPU Q6600@3GHZ,6GB RAM,2xPCIe Graphics,4 Display's.Win 7 32 & 64bit.
http://soundcloud.com/dominium


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Sat Apr 04, 2009 5:55 pm 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
Hi Danny,

the only the thing I can think of is that I didn't save this one from sdk with the panel (GUI) open. I never use XTC, but maybe you or another XTC user here that uses a Scope mixer in XTC mode could test for me if it works ok when you insert it in one of the mixer's stereo insert slots & save your xtc project with the SPINNER DE panel open. I know that's what you have to do with the panel of mixers to be able to see them in xtc, so I'm thinking it might well work the same with this & if that's the case, at least you would have a method for using it in xtc. In fact, I guess it wouldn't even need to be inserted in a mixer at all. You could set it up standalone in your xtc project & leave the panel open when saving the project. I'm curious, so let me know if you get it working ok using one of these methods.

cheers,

~Mark


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Sat Apr 04, 2009 6:29 pm 
Offline
User avatar

Joined: Fri Aug 04, 2006 12:00 am
Posts: 2039
Location: Germany, Augsburg
cool!!! thx!! what a look... without words... :o

:D


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Sat Apr 04, 2009 6:46 pm 
Offline
User avatar

Joined: Sun May 04, 2008 12:20 am
Posts: 105
Location: Belgium
Shroomz~> wrote:
Hi Danny,

the only the thing I can think of is that I didn't save this one from sdk with the panel (GUI) open. I never use XTC, but maybe you or another XTC user here that uses a Scope mixer in XTC mode could test for me if it works ok when you insert it in one of the mixer's stereo insert slots & save your xtc project with the SPINNER DE panel open. I know that's what you have to do with the panel of mixers to be able to see them in xtc, so I'm thinking it might well work the same with this & if that's the case, at least you would have a method for using it in xtc. In fact, I guess it wouldn't even need to be inserted in a mixer at all. You could set it up standalone in your xtc project & leave the panel open when saving the project. I'm curious, so let me know if you get it working ok using one of these methods.

cheers,

~Mark


I tried several posibilities ,no go, i can use it with the multi fx insert in cubase but it wil not work as vst xtc plug !
That's ok no problem but i found it odd because it works with the SPINNER !

Anyway thx for the devices :wink:

P.L.U.R

Danny.

_________________
Cubase 5,Scope v5.1 XTC,2xScope Project+2x A16 Ultra+PoCo 6000(CL1B+Virus)+UAD2-QUAD(Comp,Rev,EQ)+plugiator Full.Mackie Control+Ext.ASUS P5WDH,CPU Q6600@3GHZ,6GB RAM,2xPCIe Graphics,4 Display's.Win 7 32 & 64bit.
http://soundcloud.com/dominium


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Sat Apr 04, 2009 7:20 pm 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
Weird... I'll look into it Danny & thanks for the feedback. :)

~Mark


Top
 Profile  
 
 Post subject: Re: SPINNER DE ('Delay Edition' of SPINNER) new on 03/04/09
PostPosted: Sun Apr 05, 2009 10:05 pm 
Offline
User avatar

Joined: Thu Feb 24, 2005 12:00 am
Posts: 5669
Location: The Blue Shadows
This attached version now works properly in XTC mode. Many thanks to Danny who reported the issue & tested this version for me.

~Mark


Attachments:
SPINNER_DE_xtc_enabled.zip [931.38 KiB]
Downloaded 116 times
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group